Power Quality Test Equipment
Power quality, harmonics and flicker monitor. The PM3000 Power Logger is the best value 3 phase power quality & harmonic logger on the market today. It measures almost every aspect of the electricity you're supplying or receiving, so is a must for utility, electricity and power supply companies as well as large industrial consumers, from heavy machinery plants to hospitals and supermarkets.
PowerMaster 7000HK is an exceptional three phase power quality recorder/analyser for the Power Industry Professional. It is a user-friendly, comprehensive, compact and cost-effective power quality monitoring and trouble-shooting unit. It offers virtually everything needed to monitor and record power for surveys and audits. It includes 4 voltage input channels capable for measuring 0 to 600 Vac and 4 current input channels for use with voltage output current clamps, or Rogowski Coil sensors supplied. Eleven pre-stored connection configurations are set for 3 phase, 2 phase and single phase measurements. Users can also configure their own set-up and math calculation requirements and save them to non-volatile memory. 153.6 k samples per second. Bluetooth Equipped.
The PowerMaster 1000 Single Phase Logger is a 3-channel data logging system built into an easy to carry housing. It is ideal for responding to residential voltage complaints and power consumption problems.It monitors line to neutral and neutral to earth voltages and one current signal that accepts rogowski coils or traditional current clamps. Flicker Measurements are made to IEC 61000-4-15. Data is retrieved via an infra-red or (optional) Bluetooth serial port. Date and time, recording length, recording mode, sample rate, math channel usage and more can be configured from a laptop or personal computer via the serial port.
The Megger MPQ1000 handheld power quality analyser has features which make it ideal for troubleshooting, compliance testing and energy audits. Auto CT identification eliminates potential errors due to wrong CT range settings. The analyser will automatically identify the CT and verify it is connected correctly. This means you can be confident you will have the correct data.
- Auto CT identifies the current clamp that is connected to the analyser as well as the range to which the CT is set.
- Configuration verification which identifies and notifies you if the product has been connected incorrectly.
- On-board data analysis which can compare results against canned or custom standards. Create your own templates for internal your company standards.
- SD Card Support, USB Card Support, USB Communications as well as Ethernet connections, making it versatile.