- 2 individually adjustable blades for non-standard and standard cables
- 1/4 in. strip between blades; open end for variable conductor lengths
- Designed for use on RG-58/RG-59/RG-6/RG-6Quad
- Spring loaded handles - 5-7 rotations for most cables
- Hex wrench included in handle for blade depth adjustments
- 2 individually adjustable blades for non-standard and standard cables
- 1/4 in. strip between blades; open end for variable conductor lengths
- Designed for use on RG-58/RG-59/RG-6/RG-6Quad
- Spring loaded handles - 5-7 rotations for most cables
- Hex wrench included in handle for blade depth adjustments
- Fixed blades require no adjustments to do a wide range of cable types
- Provides a ¼” x ¼” industry standard coax strip (gray cartridge)
- Works on RG-59/RG-59 Plenum/RG-6/RG-6 Plenum/RG-6 Quad/RG-6 Quad Plenum
- Fixed blade depth, replaceable cartridges available
- Also strips UTP/STP Cat 5e/ Cat 6 (blue cartridge)
- Fixed blades require no adjustments to do a wide range of cable types
- Provides a ¼” x ¼” industry standard coax strip (gray cartridge)
- Works on RG-59/RG-59 Plenum/RG-6/RG-6 Plenum/RG-6 Quad/RG-6 Quad Plenum
- Fixed blade depth, replaceable cartridges available
- Also strips UTP/STP Cat 5e/ Cat 6 (blue cartridge)
- Feed-Thru style simplifies assembly and verification of correct wire order
- Internal shield design for contact with cable foil or drain wire
- For shielded cables with a maximum insulated conductor diameter of 0.041”
- 8-position, 8-contact RJ-45 with 50 micron gold plated pin contacts
- Max recommended outer cable diameter of 0.260”
- Shielded Feed-Thru Modular Plug
- For insulated conductors of 0.040" - 0.048" diameter
- CAT6A/6/5e shielded cable compatible for above diameter range
- Max jacket diameter of .320"
- Staggered pin and conductor design
- Crimp with FT-45™ 30-495 tool
- Pre-positioned jacket strain relief allows easier insertion of cable into the connector
- 50 micron gold plated contact area
- UL Listed E512035
- Shielded Feed-Thru Modular Plug
- For insulated conductors of 0.040" - 0.048" diameter
- CAT6A/6/5e shielded cable compatible for above diameter range
- Max jacket diameter of .320"
- Staggered pin and conductor design
- Crimp with FT-45™ 30-495 tool
- Pre-positioned jacket strain relief allows easier insertion of cable into the connector
- 50 micron gold plated contact area
- UL Listed E512035
- NEW Feed-Thru design simplifies connector to cable assembly
- Flush cut of excess conductors minimizes inadvertent contact outside of the plug
- Designed for best performance when used with the IDEAL FT-45™ Crimp Tool (30-495)
- 8 position, 8 contact RJ-45 modular plug for CAT5e, 100Ω balanced twisted pair 250 MHz cables
- 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
- NEW Feed-Thru design simplifies connector to cable assembly
- Flush cut of excess conductors minimizes inadvertent contact outside of the plug
- Designed for best performance when used with the IDEAL FT-45™ Crimp Tool (30-495)
- 8 position, 8 contact RJ-45 modular plug for CAT5e, 100Ω balanced twisted pair 250 MHz cables
- 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
- NEW Feed-Thru design simplifies connector to cable assembly
- Flush cut of excess conductors minimzes inadvertent contact outside of the plug
- Designed for best performance when used with the IDEAL FT-45™ Crimp Tool (30-495)
- 8 position, 8 contact RJ-45 modular plug for CAT5e, 100Ω balanced twisted pair 250 MHz cables
- 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
- NEW Feed-Thru design simplifies connector to cable assembly
- Flush cut of excess conductors minimzes inadvertent contact outside of the plug
- Designed for best performance when used with the IDEAL FT-45™ Crimp Tool (30-495)
- 8 position, 8 contact RJ-45 modular plug for CAT6, 100Ω balanced twisted pair 250 MHz cables
- 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
- Prevents broken connector tabs and snagging while extending connector life
- Minimizes cable bends that can reduce data speed and result in data loss
- Dampens cable movement and vibrations that can result in premature connector failure
- Sized for Cat 5e and smaller diameter Cat 6 twisted pair cables
- Fits industry standard RJ-45 8P8C connectors