Advanced Process Control Digital Multimeter
By coupling a loop calibrator with the power of a digital multimeter unrivalled efficiencies can now be achieved during installation and testing. By way of combining a high specification DMM, 4-20mA Loop Calibrator, and analogue HART protocol capability in one device, the new APPA 507 model from AVO NZ reduces the number of instruments required on-site. It also reduces the time you spend trouble shooting by quickly identifying separate issues between the instrumentation and the controls on the PLC side.
Advanced Process Control Digital Multimeter
By coupling a loop calibrator with the power of a digital multimeter unrivalled efficiencies can now be achieved during installation and testing. By way of combining a high specification DMM, 4-20mA Loop Calibrator, and analogue HART protocol capability in one device, the new APPA 507 model from AVO NZ reduces the number of instruments required on-site. It also reduces the time you spend trouble shooting by quickly identifying separate issues between the instrumentation and the controls on the PLC side.
- 50,000 count extra large digital display
- Auto Backlit, Dual display
- Auto AC, DC and AC+DC on Voltage & Current mode with Frequency indication
- Auto selection on Ohm, Diode or Continuity
- On-Screen-Menu Selection Navigator Key Drive
- High Frequency Rejection (HFR) Auto Hold
- 0.05% DCV accuracy
- 20 mA DC current source / loop calibrator/ simulator
- Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
- HART mode setting with Loop Power
- USB interface with Software included
- CAT IV 600V