Measuring up to 2000 V DC and 1500 V AC (using the PVHV Leads), as well as 1500 A AC or DC, the DCM1500S solar clamp meter is ideal for use in the installation, maintenance, monitoring and testing of photovoltaic systems as well standard AC or DC electrical equipment. It has a large clear backlit display and an automatic torch in the jaw to assist use in poorly lit areas. Using the free Megger Link App, the measurement value can be remotely monitored on a smart device using the built-in Bluetooth®. This will give a live trend graph and offer the ability to sample and log the values for later analysis.

• 2000 V DC
• TRMS 1500 V AC
• 1500 A AC/DC Smart Hold

‍

The AVO850 True RMS multimeter electronic, electricians, technicians, engineers, and service personnel. Bluetooth connectivity and app support for Android or iOS devices allow real-time result sharing.  Use the smart app to remote track readings from a safe distance or store for future reference.  

CAT III 1000 V / CAT IV 600 V safety rated with 50,000-count display on using TFT colourdisplay.  The AVO850 high precision and advance features make it ideal for industrial and lab use. Comes equipped with 4-20mA process loop measurement with % reading, AC+DC and LoZ.

The continuity function features audible and visual results. Diode function allows forward reverse bias testing of diode and semiconductor junctions. Or the temperature measurements allowing you to find electrical faults from one tool.

‍

• 320 x 240 Thin-Film-Technology Display
• High accuracy ±0.05%
• CAT IV 600 V/CAT III 1000 V rated
• Safely collect live data readings from your AVO850 to your mobile phone via Bluetooth 

The AVO215 true RMS multimeter is a rugged compact instrument for demanding environments. It measures true RMS voltage up to 600 V and current to 10 A with 4000 count resolution. As well as resistance, continuity, frequency, and capacitance for quick verifications, it meets CAT III 600 V AC/DC safety and contains a built-in flashlight, making it ideal for wide range of applications.

The AVO215 comes with a range of useful features, such as the continuity function, which provides audio and visual results through the use of a buzzer, and the diode function, which allows forward reverse bias testing of diode and semiconductor junctions. Additionally, the unit has an auto range or manual range selection, enabling you to do the job with precision and speed, and it's MIN/MAX and hold functions allow you to read the results easily in daily use.

• True RMS CAT III multimeter
• AC/DC voltages up to 600 V
• ACA/DCA up to 10 A
• Resistance 0 to 40 MΩ
• Frequency 10 Hz to 10 kHz
• Capacitance 0 to 4000 µF
• Duty Cycle, Diode, Continuity
• Function data Hold, MAX/MIN
• Bult in flashlight

‍

The new Megger DPM1000 power clamp meter combines the functionality of a power meter, harmonics meter, and data logger in one easy-to-use package that meets the requirements of BSEN 61010-1 CAT IV 600 V for supply side applications. It has a large, backlit LCD screen that clearly displays all measurements that can be selected at the touch of a button or when rotating the selection dial. It also features auto-ranging and has three-phase rotation indication and automatically switches off to save battery consumption.

The DPM1000 can measure DC, AC, pulsed, and mixed currents up to 1000 A simply by clamping the jaws around the appropriate conductor, whilst voltages up to 1000 V AC or DC may be measured by the supplied test leads. Where power measurements are to be made, both techniques above are performed simultaneously. All power related parameters can be measured including energy consumption, frequency, total harmonic distortion, distortion factor, and capacitance.

The instrument can make temperature measurements up to 1000 °C using the thermocouple provided, has an internal torch that can be used during the operation of the clamp, and has automatic non-contact voltage detection for identification of live circuits.

The DPM1000 is ideally suited to measuring mains power quality and applications in the development, installation, maintenance, and repair of equipment and devices used in power electronics and power engineering.

‍

• AC/DC voltage to 1000 V
• AC/DC current to 1000 A
• True RMS  
• Resistance 100 kΩ  
• Bluetooth link to the Megger Link app
• Phase rotation indication
• Continuity Beeper
• Data Hold/Min-Max/Peak Hold
• Bright LED torch
• CAT IV 600 V Rating
• Supplied with carry case and Carrying holster/pouch

‍

The DCM1500 is a 1500 A TRMS clamp meter that maeasures up to 1500 A AC or DC and offers 750 VAC and 1000 VDC ranges, making it ideal for use in the installation, maintenance, fault-finding, and monitoring of large AC or DC electrical systems and equipment - anywhere where there is a need to measure current, volts, resistance, and frequency.

By using True RMS measurement techniques, the DCM1500 avoids the errors that can occur when non-sinusoidal waveforms created by today’s complex loads are measured using traditional, average-sensing clamp meters.

The DCM1500 is safety rated to IEC 61010-1 CAT IV 600 V, and is drop-tested to 1.2 m onto a hard floor. The tactile barrier below the jaws of the instrument ensures a safe working distance for the operator’s hand when measuring current on live uninsulated conductors, although additional personal protection must still be used.

The instrument has a numeric displays with large clear digits complemented by a high-resolution digital bar graph, which is useful for trending and indicating fluctuations in measurements. The backlight enables you to see the screen clearly in poorly lit areas such as distribution cupboards and corners of switch rooms, and the "data-hold" feature enables you to use the instrument on hard-to-access cables, where otherwise the display may be impossible to see. The DCM1500 comes supplied with test leads, carry case, and a full 1-year manufacturer’s warranty.

‍

‍

• DC and AC current up to 1500 A
• True RMS measurement for greater accuracy
• Large jaw size safely assists with uninsulated conductor measurements
• 750 VAC and 1000 VDC
• Resistance, continuity, and frequency
• Peak, min/max, and data-hold functions

The DCM305E earth leakage clamp meter is perfect for identifying and measuring the earth leakage current in a circuit where the RCD keeps tripping out unexpectedly. The measured result will quickly identify whether the earth leakage current present is excessive, causing the RCD to trip, or if the RCD itself is over sensitive or faulty.

Specially designed to check earth leakage currents, the DCM305E is an efficient and highly versatile instrument. It has six ranges, 6 mA, 60 mA, 600 mA, 6 A, 60 A, and 100 A, with a minimum resolution of 0.001 mA on the 6 mA range. Its upper range also enables TRMS AC current measurements up to 100 A.

The 40 mm jaw has been designed to allow measurements on both insulated and non-insulated conductors and this clamp meter vastly improves measurements on circuits with harmonics/electric noise on the cables using a low pass filter of 50/60 Hz.

Safety is of the utmost importance and with that in mind, the DCM305E exceeds the latest safety design standards IEC1010-2-32 and EMC requirements and also includes a tactile hand barrier/hand guard in the instrument case design to help protect you when working.

A compare function is also featured which has 3 pre-set leakage limits (0.25, 0.50, 3.5 mA) which, when selected, offers a visual indication and audible warning when the pre-set limit is exceeded. Other key functions include the “Data Hold” feature, which helps you record measurements in areas that are difficult to access or are in poor lighting, and the "automatic power off" feature, which will switch the clamp off if no readings have been made during a 20 minute period, extending the battery life.

The instrument is pocket sized, lightweight, rugged, and easy to use, making it an ideal choice for use in the electrical industry.

‍

• 0.001 mA resolution
• Up to 100 A range for standard AC current measurements
• TRMS reading
• Low pass filter to aid stability of readings
• Auto, data and peak hold
• 40 mm jaw
• Analogue bargraph display for trending

‍

The MET1000 All-in-one true RMS electrical tester is a multifunctional voltage and current tester that gives electricians and electrical engineers a versatile and robust handheld meter with detachable test leads. Featuring both LED and LCD displays, it gives you a 200 A AC and 1000 V AC/DC tester designed for everyday use. CATIV 600 V/CATIII 1000 V rated, with an IP65 housing for added protection, it reduces the number of testers required in the professional’s tool bag.

In addition to the unit's adaptable auto-ranging voltage and continuity tests, the Megger MET1000 has a built-in current clamp for AC current measurement to 200 A. With true RMS AC measurements, a phase rotation test, and single pole voltage test built in, the MET1000 is a truly multi-purpose electrical test instrument, ideal for use in commercial, industrial, and domestic environments. It even comes with GS38 shrouds, provided as standard, to ensure compliance with the latest standards.

The instrument includes a bright LED torch to aid in safety when working in poorly lit conditions, and has a protective finger guard incorporated into its protective casing. This combined with its ergonomic design, carrying holster, and it's easy-to-use probe mounting on the rear of the tester, all help to keep the user safe and the instrument protected.

‍

• LED and LCD display with self-test
• Detachable test probes
• AC/DC voltage to 1000 V
• 200 A AC measurement
• True RMS on ACV/ACA
• Measures voltage without batteries
• Phase rotation and single pole testing abilities
• Data hold function

‍