Designed with a precision resistor / capacitor network, it provides a low voltage output signal proportional to the applied high voltage.

The low-end impedance is switch selectable between 1 MOhm and 10 MOhm, to match your measuring device. Suitable for DC or AC (up to 1 kHz sinusoidal) measurements. Perfect for in-house high voltage calibrations, no external power source required. This divider is not designed for impulse or square wave applications. A reusable shipping case is an available option for the DVR-150.

• Voltage Range: 1-150 kV DC or AC to 1 kHz sinusoidal‍
• Output: 1 V per 1 kV applied (1000:1 ratio)
• Divider Accuracy: ±0.5%, -14 to 104° F, -10 to 40° C
• Input Resistance: 715 MΩ

• Input Capacitance: 96.3 pF
• Cable Length: 25 ft. (7.6 m) RG 58/U coaxial cable
• Divider Termination: 13 in. (330 mm) diameter spinning
• Size & Weight: (W x D x H) 13 x 13 x 24.5 in., 20 lb. 330 x 330 x 622 mm, 9 kg